GOVERNOR SPRING KIT
dodge 12v engine 1994-1998

These heavier coil springs replace the stock governor coil springs to safely allow the engine to reach higher RPMs, so there is no momentum loss when shifting gears while towing up a hill. Pacbrake’s governor spring kits are complete with all parts for 3000 and 4000 RPM and are recommended for vehicles that have 5 speed standard transmissions. They are perfect for those who tow heavy loads and want more responsive power.

Governor Spring Kit
The purpose of this governor kit is to increase the maximum engine RPM and enhance throttle response when towing.
Read the entire installation manual before starting the installation, make sure you have a good understanding of all of the procedures and tools required to ensure customer satisfaction. If you are unsure about the installation, have a qualified mechanic do the installation.
 
CAUTION: Engines intended to be operated over 3200 RPM should have heavy duty intake and exhaust valve springs installed. (Pacbrake Part #: C11899 - 6 for exhaust & 6 for intake)
 
IMPORTANT! Clean the engine thoroughly around the injection
pump prior to any disassembly, it is imperative no dirt or foreign material enter the injection pump